info@rpluce.comCall: 800.445.0002
Search Catalog: GO
Cases and Lighting Tools Mechanical Components
All Categories > Omega Aluminum Drawn Cans > Square and Rectangular Enclosures > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Square and Rectangular Enclosures

Check up to five results to perform an action.

Round, Square & Rectangle boxes are produced from deep draw tooling created by Omega Tool, that ensures consistency. Available in any height to maximum dimensions shown. Deeper, cans available with a tool service charge.

Standard enclosure tolerances
Length, width, and trim height:
Dimensions up to
6" ± .02"
6" to 24" ± .03"
over 24" ± .06"
Radius Tolerances ±. .030

Closer tolerances on trim heights can be provided on special order at additional costs.

NOTE: Width and length are measured at point of tangency between bottom radius (R-1) and side (R-2).

aw marks, small scratches and minor scuffing is inherent in drawn boxes. For a scratch free finish on exterior of boxes> secondary operations must be specified.

Material Thickness
Thickness shown is the nominal dimension of the blank before drawing. Actual wall thickness of an average OMEGA box is normally 80% or more of the nominal blank thickness. This is dependent on depth of draw, number of draws and net blank thickness (a variable within mill tolerances).


Search Items


Compare Items
   
  Results 1 - 25 of 343  1 2 3 4 5 »  

Item #

W Outside Width

L Outside Length

H Outside Depth

R-1 Corner Radii Bottom (Inside)

R-2 Corner Radii Side (Inside)

Material Thickness (Gauge)

OMT0062-0192-02 0.620 in 1.920 in 1.250 in 0.156 in 0.136 in 0.020 in
OMT0092-0092-02 0.915 in 0.915 in 2.250 in 0.093 in 0.078 in 0.020 in
OMT0105-0300-02 1.050 in 3.000 in 1.312 in 0.125 in 0.125 in 0.020 in
OMT0119-0256-02 1.190 in 2.560 in 3.250 in 0.125 in 0.125 in 0.025 in
OMT0125-0200-02 1.250 in 2.000 in 1.000 in 0.125 in 0.125 in 0.025 in
OMT0127-0127-02 1.265 in 1.265 in 3.250 in 0.125 in 0.125 in 0.020 in
OMT0138-0259-03 1.380 in 2.590 in 4.500 in 0.172 in 0.125 in 0.032 in
OMT0139-0395-03 1.391 in 3.953 in 5.000 in 0.187 in 0.187 in 0.032 in
OMT0140-0208-04 1.400 in 2.080 in 1.150 in 0.190 in 0.190 in 0.040 in
OMT0142-0366-04 1.415 in 3.655 in 4.000 in 0.125 in 0.125 in 0.040 in
OMT0150-0186-04 1.500 in 1.860 in 1.250 in 0.125 in 0.125 in 0.040 in
OMT0150-0375-04 1.500 in 3.750 in 1.625 in 0.250 in 0.200 in 0.040 in
OMT0150-0400-02 1.500 in 4.000 in 1.500 in 0.150 in 0.250 in 0.025 in
OMT0155-0191-06 1.545 in 1.905 in 1.250 in 0.063 in 0.125 in 0.063 in
OMT0156-0443-05 1.558 in 4.432 in 4.500 in 0.156 in 0.156 in 0.050 in
OMT0159-0159-04 1.590 in 1.590 in 3.000 in 0.158 in 0.203 in 0.040 in
OMT0159-0175-02 1.590 in 1.750 in 1.250 in 0.125 in 0.125 in 0.025 in
OMT0163-0210-05 1.625 in 2.100 in 1.250 in 0.250 in 0.250 in 0.050 in
OMT0163-0425-05 1.625 in 4.250 in 5.000 in 0.125 in 0.125 in 0.050 in
OMT0164-0629-04 1.638 in 6.286 in 1.500 in 0.250 in 0.312 in 0.040 in
OMT0174-0399-04 1.740 in 3.990 in 2.000 in 0.100 in 0.100 in 0.040 in
OMT0175-0175-04 1.750 in 1.750 in 4.000 in 0.190 in 0.190 in 0.040 in
OMT0175-0200-04 1.750 in 2.000 in 2.500 in 0.093 in 0.078 in 0.040 in
OMT0175-0238-03 1.750 in 2.375 in 3.500 in 0.125 in 0.125 in 0.032 in
OMT0175-0238-05 1.750 in 2.375 in 1.500 in 0.125 in 0.125 in 0.050 in
  Results 1 - 25 of 343  1 2 3 4 5 »  
R. P. Luce & Company Inc. | Technical Representatives Riverhawk CompanyHelical MW Industries Inc.TenbaHardigg CasesZargesPelicanLord Ask Us How